The desiccant breather replaces the standard dust cap or OEM breather cap on equipment, offering better filtration to protect against even the smallest particulates that destroy the effectiveness of your machinery, and cause downtime and costly repairs. As air is drawn into equipment through the breather, the layered desiccant filter elements remove particulate while the desiccant beads strip harmful moisture. While in service or during shut-down, the desiccant beads attract moisture from inside the equipment reservoir, actively drying the equipment.
As your industrial equipment heats up and cools down, it expands and contracts. And in order to keep machinery from building up too much pressure, equipment OEMs include vent caps on the fill port to allow expanded air to escape. There’s only one problem, while they let air out, those simple caps don’t prevent small dirt particles and moisture from making their way into the tank. This can damage bearings, gears, and valves by slowly wearing away the critical surfaces. Even worse, over time, moisture will condense inside your oil reservoir introducing water to your lubricants, consequently, keeping your maintenance team busy. With a wide range of sizes and features for almost any application and industry, breathers simultaneously remove moisture from the headspace of equip-ment with silica gel and prevent even the smallest particles from entering your oil tanks with multi-layer filtration.
The best part is you’ll see a return on investment almost immediately. With fewer breakdowns and production stoppages, you’ll run more efficiently and create less waste, all while increasing the working life of your lubricants and equipment. Our unique design features a longer body, which permits 10% greater volume of silica gel desiccant beads when compared to leading competitors.
65 Chelmsford Street, Williamstown North Victoria 3016, Australia
Open today | 09:00 am – 05:00 pm |
Copyright © 2024 Silveri Engineering & Trading Pty Ltd - All Rights Reserved.
This website uses cookies. By continuing to use this site, you accept our use of cookies.
· 24 volt, 16 kg grease pump kit is ideal for mining & heavy industrial applications
· Suitable for grease up to NLGI2
· Working pressure of 4,000 psi
· Continuous operation
· Can dispense up to 70-80 grams per minute
· Suitable for working temperatures of -10°c to +40°c